• 4 x Height Adjustable Strut
• 4 x Main Spring
• 4 x Damper Spring
• 4 x Lowering Spring Seat
• 4 x Spring Seat Lock
• 4 x Top Hat Collars
• 4 x Bump Stops
• 2 x Hook spanner wrench
• 2 x Raceland Stickers

Installation hints:

• Before you lower your ride height, find out if you are allowed to lower it in your state. The installation of the coil over kit is to be done only by a licensed mechanic.
• We recommend that you spray light oil on the threaded part of the coil over kit to prevent seizing of the spring seats.
• Do not use pneumatic tools.
• After you have installed the Raceland coil over kit, test it by driving it slowly and retighten all bolts to the specified torque value.
• After the proper height has been determined, have your car professionally aligned.

This product is intended to be used only in race cars and or show vehicles. The Raceland coil over kit is not to be installed in vehicles driven on public roads.

The disassembly of the shock absorber must be performed by Raceland mechanics. Please contact Raceland for information on the service required and the related labor cost and time necessary to complete any disassembly work. We do not accept any responsibility for any injuries or damage created by disassembling of the Raceland shocks by yourself. This should only be done by Raceland mechanics. We caution you from driving on dirt roads and getting sand and grit on the threaded areas which may damage the threaded area and piston. If the piston rod is scratched, then the oil seal needs to be replaced, which we can do at Raceland. Please do not attempt to replace the oil seals because it is very dangerous. It contains highly compressed gases in the shock absorber. Do not drill the shock absorber because it will create flames. We recommend you do not modify the Raceland coil over.

Warranty:

Raceland offers a 2 year warranty with free replacement if properly installed by a licensed mechanic.

Raceland assumes no responsibility for any accident, injury, death or damage which may be related to disassembly of the product performed by non-Raceland mechanics.